Another way to make your AR15 a fixed magazine rifle

Published on May 20, 2018
Duration: 6:12

This guide details a DIY method for converting an AR-15 to a fixed magazine configuration, often required for compliance in certain states like California. The process involves modifying a standard magazine by altering the follower and adding internal and external JB Weld components to create a fixed, non-removable magazine. This allows for compliance without permanent firearm alteration, enabling the use of standard magazines when outside restrictive jurisdictions.

Quick Summary

A DIY fixed magazine conversion for an AR-15 can be achieved by modifying a standard magazine. This involves grinding the follower and using JB Weld to create an internal stop and an external bead at the bottom, preventing the magazine from being removed without tools, thus complying with California's fixed magazine laws.

Chapters

  1. 00:09Introduction and Channel Support
  2. 00:22Platform Distribution
  3. 00:48Patreon and Amazon Link
  4. 01:17DIY Fixed Magazine Project Introduction
  5. 01:50Magazine Modification Steps
  6. 02:10Using JB Weld for Retention
  7. 02:35Estimated Time and Materials
  8. 02:57Cost-Effective Compliance Solution
  9. 03:07Range Use and Travel Flexibility
  10. 03:28Featureless Rifle Configuration Example
  11. 03:45Testing and Performance Observations
  12. 04:04Durability and Craftsmanship Praise
  13. 04:26Potential for Stronger Bonding Methods
  14. 04:35DIY Mag Summary and Pride of Creation
  15. 04:51California Gun Owner Resilience
  16. 05:42Marines' Spirit: Improvise, Adapt, Overcome
  17. 05:50Conclusion and Thanks
  18. 06:00Sign Off

Frequently Asked Questions

How can I make my AR-15 a fixed magazine rifle for California compliance?

You can convert your AR-15 to a fixed magazine by modifying a standard magazine. This involves grinding down the follower to prevent full insertion and using JB Weld to create an internal stop and an external bead at the bottom to retain the magazine, making it non-removable without tools.

What materials are needed for a DIY AR-15 fixed magazine conversion?

For a DIY fixed magazine conversion, you'll need a standard AR-15 magazine, a file or grinder, an old hacksaw blade or similar metal piece, and JB Weld. These materials are inexpensive and readily available, making the project cost-effective.

How long does it take to perform a DIY fixed magazine modification on an AR-15 magazine?

The process for modifying an AR-15 magazine into a fixed magazine is relatively quick, estimated to take around 20 minutes of active work. Allowing time for the JB Weld to cure is also necessary.

Is a DIY fixed magazine conversion a reliable solution for California compliance?

While generally effective for range use, some users report occasional issues with round capacity due to the follower hanging up. However, the DIY method is a cost-effective way to achieve compliance, and the JB Weld can be applied robustly for durability.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from GunGuyTV

View all →