Cleaning & Maintenance of WLVRN

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This expert guide details the step-by-step cleaning and maintenance procedure for the Ruger Red Label III Over/Under Shotgun, as demonstrated by a Ruger firearms instructor. It covers complete disassembly, thorough cleaning of all components including the bore and choke tubes, proper lubrication techniques, and safe reassembly, emphasizing critical safety precautions throughout.

This video provides a demonstration of how to disassemble and reassemble a Swedish Luger pistol chambered in 9mm. The presenter walks viewers through the process, highlighting key steps for proper maintenance. The demonstration includes shooting the pistol at various targets, showcasing its functionality on the range.

This video provides a clear, step-by-step guide to field stripping the Girsan Witness CMX X pistol. It emphasizes safety by starting with unloading the firearm and checking the chamber. The process involves aligning the slide with a specific notch to remove the takedown pin, then separating the slide, recoil spring, guide rod, and barrel. The presenter notes the pistol's construction, featuring an aluminum slide and polymer frame, common in 2011-style firearms.

This guide details the takedown procedure for the Remington Model 10 Trench Gun, demonstrating how to disassemble the firearm even with its trench gun hardware. It emphasizes a critical step for reassembly involving the extractor, providing tips to prevent damage and ensure proper alignment. The process involves releasing a tab, rotating the magazine tube, and then separating the receiver.

This guide details a specific trick for disassembling the Smith & Wesson M&P9 (1.0 model) for cleaning. It highlights a common point of confusion where standard field stripping methods fail on this older version. The key is using a tool to manipulate an internal lever after locking the slide back, a detail often overlooked but crucial for successful disassembly. Instruction comes from an experienced source demonstrating clear expertise in M&P platform nuances.

This entry details the safe handling of the T G-67 M-SOFT training hand grenade, as demonstrated by Ziga from Polenar Tactical. It emphasizes the critical role of the safety pin and spoon mechanism in preventing accidental detonation. The M-SOFT variant is likely for airsoft or training purposes, highlighting the importance of understanding device types for safety.

This expert guide from Polenar Tactical demonstrates the critical technique for applying a CAT-style tourniquet to control severe limb hemorrhage. The instruction emphasizes correct placement ('high and tight') and windlass application to stop bleeding, acknowledging the necessary pain involved. The video highlights that despite discomfort, proper tourniquet use is a life-saving measure.

This guide details the operation of the TAG 18 Smoke White grenade, as demonstrated by Polenar Tactical. It covers the basic mechanical components and the activation process, emphasizing its use for concealment or signaling. The instruction comes from an experienced source, offering a practical look at this tactical accessory.

This guide details the operation of the FBG-6 Flash Bang 2.0, a pyrotechnic distraction device. It emphasizes the function of the safety lever and the 2.0-second delay. The demonstration highlights that real flashbangs disorient through sound and flash, not the extreme visual effects seen in media. Expert instruction from Polenar Tactical covers safe handling and deployment principles.