Curving a 50BMG!

Published on September 29, 2025
Duration: 1:00

This video demonstrates an experimental technique for attempting to curve a .50 BMG projectile through custom-bent galvanized steel pipes using a Serbu RN50 rifle. The experiment highlights the immense power of the .50 BMG round, showing a pipe rupture on a sharp bend and a successful navigation of a more gradual curve. The presenter, Edwin Sarkissian, showcases proficient handling of high-caliber firearms and an understanding of breech-loading mechanics, emphasizing safety with proper protection and remote firing.

Quick Summary

An experimental technique was demonstrated using a Serbu RN50 .50 BMG rifle to curve a bullet through custom-bent galvanized steel pipes. The high-energy shot successfully navigated a multi-point gradual bend, impacting a steel target, though a single-bend pipe ruptured due to the projectile's force. Safety protocols including hearing protection and remote firing were observed.

Chapters

  1. 00:00Experiment Introduction
  2. 00:11Rifle Setup and Loading
  3. 00:24First Shot Attempt (Pipe Rupture)
  4. 00:41Second Shot and Successful Curve

Frequently Asked Questions

What rifle was used in the experiment to curve a .50 BMG bullet?

The experiment utilized a Serbu RN50 rifle, a single-shot, break-action firearm chambered in .50 BMG. Its design allows for direct insertion of the barrel into custom-made pipe guides for the trajectory test.

How was the .50 BMG bullet 'curved' in the video?

The bullet was 'curved' by firing it through custom-bent galvanized steel pipes. The experiment tested both single-bend and multi-point gradual bends, with the latter successfully guiding the projectile along its path.

What safety precautions were highlighted during the .50 BMG pipe experiment?

The presenter emphasized safety by using proper hearing and eye protection, demonstrating proficient handling of the high-caliber firearm, and employing remote firing techniques for the experimental setup.

What happened during the first shot attempt with the bent pipe?

During the first shot, the immense pressure and velocity of the .50 BMG round caused the single-bend galvanized steel pipe to rupture at the bend, demonstrating the extreme forces involved.

More Gunsmithing & DIY Videos You Might Like

More from Edwin Sarkissian

View all →