DIY Cant Indicator Install

This guide details the process of lapping an AR-15 receiver to ensure proper barrel alignment for improved long-range accuracy. Instructor Stephen Caleb from Brownells explains that receiver faces can be slightly out of alignment, leading to barrel runout. The process involves using a specialized lapping fixture and aluminum oxide lapping compound with a drill to create a perfectly flat receiver face. This ensures the barrel seats flush and square, critical for precision shooting beyond 500 yards.

This guide details the installation of an aftermarket AR-15 trigger, specifically a Timney Triggers product, into a clear lower receiver. The process involves unboxing, component inspection, mounting the trigger assembly with pins, and performing a function check. The demonstrative tone and clear handling of components suggest an experienced instructor guiding the viewer through a common firearm modification.

This expert guide from the School of the American Rifle details how to identify and address rough carrier key bores in AR-15 bolt carrier groups. The instructor, demonstrating expert knowledge, explains how these manufacturing defects, particularly on Colt components, can lead to premature wear on the gas tube and reduced reliability. Solutions involve replacing the defective carrier key to ensure smooth operation and longevity of the firearm.

This guide details how to adjust an AR-15's adjustable trigger, focusing on reducing pre-travel and overtravel for a crisper break. It emphasizes safety checks and the use of a trigger pull gauge. The video, presented by an expert from AT3 Tactical, explains that adjustable triggers offer customization for accuracy and performance, particularly for competition shooters and range enthusiasts, but may not be ideal for home defense or casual use due to potential safety concerns if set too light.

This video demonstrates a timed challenge of field stripping and reassembling an HK VP9 pistol. The presenter successfully completes the task in 29 seconds, highlighting the importance of familiarity with firearm maintenance procedures. It also includes a promotional segment for SDI's online gunsmithing programs.

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This guide details the advanced technique for executing a long-range elk hunt, as demonstrated by a 12-year-old hunter under expert supervision. It emphasizes precise range estimation, scope adjustment using ballistic turrets, and marksmanship fundamentals for a successful shot at extreme distances (1376 yards). The process highlights the importance of preparation, practice, and specialized equipment for challenging hunting scenarios.

This expert guide from Gunwerks demonstrates the significant impact of the Coriolis effect on long-range bullet trajectory. Jeremy Winters, a Gunwerks Product Specialist, explains how Earth's rotation can shift Point of Impact (POI) by over 1 MOA at 1000 yards when shooting East or West. The video provides a live-fire demonstration and recommends shooting North or South to collect accurate ballistic data, minimizing Coriolis-induced errors.

This guide details the process of transforming a factory Remington Model 700 Sendero into a more capable long-range rifle, as demonstrated by Mike Davidson from Gunwerks. Key steps include a trigger upgrade to a 2-pound pull and a precision bedding job using Devcon Aluminum Putty to ensure action stability. The process emphasizes proper disassembly, careful application of bedding materials, and correct reassembly with specific torque values for action screws.

This video demonstrates a professional long-range coyote hunt in Montana, showcasing the effective use of a Gunwerks rifle. Dustin Butler, a representative for Gunwerks, highlights the 'range, dial, and kill' method for successful predator engagement at various distances, from close encounters to over 500 yards. The guide emphasizes proficiency with long-range optics and equipment for accurate shots in challenging terrain.