Experimental Pre-WWI Ross .30-06 Machine Gun

Published on December 14, 2020
Duration: 9:29

This video provides an in-depth look at an experimental Pre-WWI Ross .30-06 machine gun prototype, presented by Ian McCollum. The analysis covers its unique construction methods, including 'carpentry-style' sheet metal fabrication, and its internal mechanism, which adapted a bolt-action design to a gas-operated, hammer-fired, open-bolt system. The prototype's historical context, including British War Office trials and potential testing at Springfield Armory, is also detailed.

Quick Summary

The Ross .30-06 Selfloading Prototype is an experimental machine gun developed around a Ross M10 bolt for British War Office trials in 1913. It features a unique gas-operated, open-bolt, hammer-fired system with a 25-round capacity and was constructed using 'carpentry-style' sheet metal fabrication for rapid prototyping.

Chapters

  1. 00:00Introduction to the Ross .30-06 Prototype
  2. 01:09British Military Trials
  3. 02:28External Features and Magazine
  4. 03:43Internal Mechanism and Firing Cycle
  5. 05:33Gas System and Ergonomics
  6. 06:45Prototype Construction Methods
  7. 07:55Provenance and US Testing

Frequently Asked Questions

What is the Ross .30-06 Selfloading Prototype?

The Ross .30-06 Selfloading Prototype is an experimental machine gun developed around a Ross M10 bolt. It was requested by the British War Office for trials in 1913 and features a unique gas-operated, open-bolt, hammer-fired system with a 25-round capacity.

How was the Ross .30-06 Selfloading Prototype constructed?

The prototype utilized 'carpentry-style' sheet metal fabrication, employing screws, welding, and even mortise and tenon joints. This method allowed for rapid prototyping without the need for complex forgings or specialized tooling, making it efficient for experimental designs.

What were the key mechanical features of the Ross .30-06 Selfloading Prototype?

It was gas-operated with a piston under the barrel, fired from an open bolt, and used a hammer-fired system, a significant departure from its bolt-action origins. The angled 25-round magazine was also a notable feature.

Where is the Ross .30-06 Selfloading Prototype located and what is its history?

This specific example was likely tested at Springfield Armory in 1917 and is now housed at the Canadian War Museum. Its development history includes British War Office trials just before World War I.

More Gunsmithing & DIY Videos You Might Like

More from Forgotten Weapons

View all →