Gunsmithing British Side by Side Shotguns with John F. "Jack" Rowe DVD Trailer

This guide details the process of replacing the mainspring on a Swiss Luger 1900. It covers identifying a failed mainspring, the correct direction for removal, manipulating the grip safety, compressing and installing the new spring with safety precautions, and reassembly. The new spring is noted to be significantly stiffer, requiring a specific operational technique for this model.

This guide details the disassembly process for a specific 19th-century Warner revolving carbine, highlighting its unique design that omits a traditional ramrod and loading lever. The process involves removing a single screw to detach the barrel assembly, which then rotates and slides off. This method is distinct from typical percussion revolvers.

This guide details the proper installation and removal of choke tubes for the Ruger Red Label III shotgun, as demonstrated by a Ruger expert. It covers the use of the included choke tube wrench, cleaning and oiling threads, and the importance of not overtightening. The video emphasizes safety and correct choke selection for different ammunition types.

This guide details the step-by-step assembly and disassembly of the Ruger Red Label III Over/Under Shotgun, presented by Ruger Firearms. It emphasizes crucial safety precautions, including clearing the firearm and wearing safety glasses, before proceeding with the field stripping process. The instructions cover removing and reattaching the fore-end and barrel assembly, concluding with a functional check.

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This guide details the process of fitting and trimming an aftermarket rail intended for a 6-inch barrel Colt Python to a 4-inch barrel model. The primary challenge is the difference in barrel ramp angles, which prevents a flush fit. The process involves cutting the rail to size and applying a finish to the exposed metal.

This guide details a high-speed Cowboy Action Shooting stage, demonstrating expert transitions between a lever-action rifle, dual single-action revolvers, and a side-by-side shotgun. It highlights efficient manual shotgun reloading techniques from a belt carrier, showcasing advanced proficiency in competitive shooting disciplines. The video emphasizes speed and accuracy across multiple firearm types.

This video provides an expert-level demonstration of the Mosin-Nagant M91/30 PU Sniper rifle. It covers visual inspection, the proper loading procedure for 7.62x54R ammunition, and live fire at an outdoor range, showcasing bolt manipulation and recoil control. The demonstration is presented in a silent, ASMR-style format by an authoritative demonstrator.

This guide details the complex process of reboring a Winchester 1885 Low Wall rifle from .32 Rimfire to .357 Magnum, addressing a pitted bore. Expert gunsmith Larry Potterfield demonstrates disassembly, barrel removal, specialized reboring at Delta Gun Shop, chambering, crowning, action conversion, and final marking/finishing. The process highlights advanced machining techniques and specialized tools required for such a conversion.

This guide details the cycle of operation for the Winchester Model 12 shotgun, as explained by Larry Potterfield of MidwayUSA using a cutaway model. It covers loading, safety engagement, firing, extraction, and chambering. The explanation highlights the hammerless pump-action design and internal component interactions, offering valuable insights for gunsmithing and understanding firearm mechanics.