H&K G36 Rifle Field Strip

Published on November 6, 2015
Duration: 3:34

This guide details the field stripping procedure for the Heckler & Koch G36 rifle, as demonstrated by Alex C. The process involves removing three takedown pins to separate major components like the receiver, magazine well, and forend. Internal parts, including the bolt carrier group, recoil spring, and gas system, are then removed for cleaning and maintenance. The video highlights the G36KE's portability with its folding stock and 12.5-inch barrel, and addresses its reliability in context.

Quick Summary

The H&K G36 field strip involves removing three takedown pins to separate major components. The process includes detaching the pistol grip/magazine well, removing the recoil spring and bolt carrier group, and then disassembling the forend to access the short-stroke gas system. The bolt group is further broken down by removing retaining pins to release the firing pin, cam pin, and bolt. Takedown pins can be stored in the folding stock.

Chapters

  1. 00:00Introduction to G36 Variants
  2. 00:40Initial Disassembly Steps
  3. 01:16Internal Components Removal
  4. 01:39Gas System Disassembly
  5. 02:21Bolt Group Breakdown
  6. 02:48Conclusion and Reliability Discussion

Frequently Asked Questions

How do you start field stripping an H&K G36?

Begin by ensuring the H&K G36 is unloaded. Then, remove the rear takedown pin, followed by the magazine well pin, and finally the front takedown pin to separate major assemblies like the pistol grip and receiver.

What are the key internal components removed during H&K G36 field stripping?

During field stripping of the H&K G36, you will remove the recoil spring and buffer assembly, the bolt carrier group, the operating rod and spring, and the gas piston. The bolt itself is then disassembled from the carrier.

Where can takedown pins be stored on the H&K G36 during disassembly?

The H&K G36 features integrated storage holes on its folding stock. These are specifically designed to hold the takedown pins securely when they are removed, preventing loss during the field stripping process.

What caliber is the H&K G36 rifle?

The H&K G36 rifle, including variants like the G36KE shown, is chambered in the 5.56x45mm NATO caliber. Receiver markings confirm this specification.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from TFB TV

View all →