How To Spray Paint/Rattle Can Your Knife & Sheath In The Multicam Pattern Using Primary Arms Stencil

Published on May 12, 2024
Duration: 18:08

This guide details how to apply a Multicam pattern to a knife and sheath using spray paint and a stencil. It emphasizes proper surface preparation, including cleaning and masking, and the application of multiple paint layers for a durable, blended finish. The process involves using specific Rustoleum camouflage paints and a cost-effective stencil to achieve a professional-looking, tactical aesthetic.

Quick Summary

To achieve a DIY Multicam pattern on your knife and sheath, start by cleaning and masking the surfaces. Use essential colors like army green, sand, and earth brown, applying them with a stencil from 8-12 inches away. For enhanced durability, consider a matte clear primer and allow a 7-day cure time for plastics.

Chapters

  1. 00:00Introduction and Project Overview
  2. 00:20Why Spray Paint? Durability vs. Cost
  3. 02:00Knife and Sheath Showcase (Microtech Socom Alpha Mini)
  4. 03:42Masking the Blade Edge
  5. 04:21Essential Multicam Paint Colors
  6. 05:39Optional Primer for Durability
  7. 06:39Tools for Surface Prep and Application
  8. 07:09The Primary Arms Multicam Stencil
  9. 07:30Surface Preparation Steps
  10. 08:02Applying Clear Coat Primer
  11. 09:58Applying the Base Coat (Army Green)
  12. 11:32Applying Multicam Pattern Colors (Sand & Brown)
  13. 14:02Finished Product and Common Mistakes
  14. 15:32Tips for Base Color Visibility
  15. 16:41Comparing to Reference Multicam
  16. 17:31Removing Painter's Tape
  17. 17:50Conclusion and Call to Action

Frequently Asked Questions

What are the essential spray paint colors for a DIY Multicam pattern?

For a basic Multicam pattern, you'll need three core colors: an army green for the base layer, a sand or khaki color, and an earth brown. Using a matte clear primer beforehand can also enhance durability.

How do I prepare my knife and sheath for spray painting?

Thorough preparation is key. Clean the surfaces with alcohol prep pads to remove oils and debris. Lightly sand the surface to create a better grip for the paint. Mask off any areas you don't want painted, like the blade's sharp edge.

What is the recommended spray distance for applying camouflage paint?

Maintain a spray distance of approximately 8 to 12 inches from the surface. This distance helps prevent the paint from 'blowing out' the stencil design and creates a more even, controlled application of the camouflage pattern.

How can I make my base color stand out more in a spray-painted camouflage pattern?

To make your base color more prominent, simply apply fewer layers of the subsequent camouflage pattern colors. This allows more of the original base coat to show through the design.

More Gunsmithing & DIY Videos You Might Like

More from Gear And Guns

View all →