Installation - Miculek Competition Elevator(Lifter)

Published on September 23, 2022
Duration: 4:34

This guide details the installation of the Miculek Competition Elevator for Mossberg 930 and 940 series shotguns. The elevator is designed to prevent 'thumb bite' during rapid shell loading by providing a larger, radiused surface. The installation process involves disassembling the trigger group, replacing the old elevator with the new Miculek component, and reassembling the trigger group. The video emphasizes the importance of proper pin alignment and recommends consulting a gunsmith for those unfamiliar with firearm work.

Quick Summary

The Miculek Competition Elevator for Mossberg 930/940 shotguns prevents 'thumb bite' during loading with its improved anti-bite design. It features a radiused corner to prevent shell catch override, a common issue with older 930 elevators. Installation requires basic tools like a bench block and pin punch.

Chapters

  1. 00:16Product Introduction & Compatibility
  2. 00:25Key Feature: Anti-Bite Design
  3. 00:44Miculek vs. Older 930 Elevators
  4. 01:28Installation Pre-Requisites
  5. 01:48Trigger Group Disassembly
  6. 02:30Elevator Removal and Replacement
  7. 03:15Trigger Group Reassembly
  8. 03:55Final Assembly and Conclusion

Frequently Asked Questions

What is the main benefit of the Miculek Competition Elevator?

The primary benefit of the Miculek Competition Elevator for Mossberg 930 and 940 shotguns is its 'anti-bite' design. This feature prevents the user's thumb from being pinched or injured by the shell catch during rapid shell loading, a common issue with shorter elevator designs.

How does the Miculek Competition Elevator improve upon older Mossberg 930 elevators?

Older Mossberg 930 elevators sometimes suffered from the shell catch overriding and causing the mechanism to lock up. The Miculek Competition Elevator addresses this by incorporating added material with a radiused corner, which prevents the shell catch from overriding and ensures smoother operation.

What tools are needed to install the Miculek Competition Elevator?

The installation of the Miculek Competition Elevator is relatively straightforward and typically requires only a few basic tools. These commonly include a bench block to support the firearm components and a pin punch to safely remove and install the trigger group pins and elevator pin.

Is it safe to install the Miculek Competition Elevator myself?

While the installation is presented as manageable, it's always recommended to consult a qualified gunsmith for any firearm work if you are not experienced. Always ensure the firearm is completely unloaded and visually cleared before beginning any disassembly or installation procedures.

More Gunsmithing & DIY Videos You Might Like

More from Lena Miculek - Trigger Tribe

View all →