Projéteis de cera: será que funcionam mesmo?

This guide details the process of creating DIY wax slugs, as demonstrated by Civilian Tactical. The process involves modifying standard 12-gauge birdshot shells by mixing the lead shot with melted wax and reloading it into the casing. This modification aims to improve projectile integrity and energy transfer upon impact, as shown in a comparison against standard birdshot. The instructor emphasizes safe handling and explains the terminal ballistics of this custom ammunition.

This guide details the DIY process for creating wax slugs, as demonstrated by Civilian Tactical. It covers the shell modification, mixing lead shot with wax, and forming the projectile. The video also includes testing against cinder blocks, standard slugs, and a ballistic gel, highlighting the unique damage potential of wax slugs compared to birdshot and conventional slugs. The host, an experienced individual in ballistics testing and firearm safety, provides practical insights into this ammunition modification.

This video demonstrates an experimental modification of a 12-gauge shotgun shell, replacing birdshot with thousands of bobby pins. Through a three-part test involving water jugs, cardboard targets, and ballistic gelatin, the effectiveness and lethality of this improvised projectile are evaluated. The results indicate significant energy transfer, wide pattern spread, and penetration capabilities, suggesting the bobby pin shell is 'certified deadly'.

This video demonstrates how to create a 'cut shell' by partially detaching the base of a birdshot shell with a knife. The stated purpose is to allow the birdshot to stay contained longer, potentially increasing momentum and damage downrange. The presenter contrasts the performance of a standard birdshot shell with a cut shell using slow-motion footage.

This video demonstrates an experimental test of replacing lead shot in a 12-gauge shotgun shell with approximately 100 hairpins. The test involves three parts: a water test to show immediate energy, a cardboard test for pattern analysis, and a ballistic gelatin test to assess penetration and projectile behavior. The results indicate significant projectile deformation and penetration, suggesting a potentially lethal outcome.

This video explores the feasibility of creating DIY riot control rounds using 37mm grenades, a professional reloader, and hardwood wooden spheres. The demonstration includes tests on paper targets, water jugs, and ballistic gelatin to assess spread, penetration, and damage. The results suggest that these homemade rounds can be effective for less-lethal applications.

This video explores the compatibility of a 50 BMG cartridge with a 12 gauge flare gun. The experiment reveals that while the cartridge fits, the flare gun's mechanism cannot ignite the tough 50 BMG primers. However, it successfully fires a standard 12 gauge blank, highlighting the difference in primer hardness. The content is presented from a hobbyist perspective, focusing on experimental curiosity rather than professional instruction.

This video from Tática Civil, featuring an expert instructor, explains the dangers of firing upwards due to projectile drop and terminal velocity. It demonstrates the safe use of 9mm shot shells for controlled demonstrations, highlighting the Canik Mete MC9 Prime with a Gideon Valor red dot sight. The instructor emphasizes crucial firearm safety protocols.

This guide details an experimental test to debunk the myth that a .50 BMG round passing near a target can be lethal. Using a ballistic mannequin, cardboard indicators, and a concrete backstop, the test demonstrates that a near miss from a .50 BMG round does not impart enough shockwave or air pressure to cause fatal injury, though the projectile itself possesses immense kinetic energy as evidenced by its impact on the concrete block. The test was conducted objectively by an individual with high authority, indicated by their empirical testing methods and proper safety protocols.

This video explores the surprising functionality of a realistic toy shotgun, the M870 by Dart Armory. The presenter tests if it can chamber and cycle real 12-gauge shotgun shells, comparing its operation to a Mossberg 590. The toy shotgun successfully loads, chambers, and ejects real shells, demonstrating a high degree of realism in its mechanical operation.