Smith & Wesson M&P Pro Series Destroyed: Catastrophic Failure

Published on March 14, 2014
Duration: 10:44

This video details a catastrophic failure of a Smith & Wesson M&P 9 Pro Series pistol during its first range outing. The firearm experienced an explosion on the last round of the second magazine, resulting in significant damage to the frame, slide, and internal components, including a cracked polymer frame and a sheared casing head. The shooter sustained hand injuries requiring medical attention. The analysis suggests a potential design defect, and the speaker plans to contact Smith & Wesson.

Quick Summary

A Smith & Wesson M&P 9 Pro Series pistol suffered a catastrophic failure, cracking its polymer frame and damaging internal components like the extractor and slide stop. The incident occurred on the last round, lodging a sheared casing head in the chamber and requiring the shooter to seek emergency medical treatment for hand injuries.

Chapters

  1. 00:00Introduction to Failure
  2. 00:37Incident Description
  3. 01:55The Explosion
  4. 02:50Injuries and Treatment
  5. 04:07Visual Damage Assessment
  6. 06:12Component Failure
  7. 07:30Casing Examination
  8. 08:18Conclusion and Next Steps

Frequently Asked Questions

What caused the Smith & Wesson M&P Pro Series pistol to fail catastrophically?

The Smith & Wesson M&P 9 Pro Series experienced a catastrophic failure on its last round, resulting in a cracked polymer frame, a stuck slide, a sheared casing head in the chamber, and damage to the extractor and slide stop. The exact cause is under investigation, but potential design defects are considered.

What injuries did the shooter sustain from the firearm malfunction?

The shooter sustained injuries from metal fragments embedded in their hands and also suffered facial cuts. These injuries required immediate medical attention and a visit to the emergency room for treatment.

What specific components of the M&P Pro Series were damaged during the failure?

The damage included a significant crack in the polymer frame near the takedown lever, the slide being stuck out of battery, a missing extractor, a bent slide stop, and a sheared casing head lodged in the chamber.

What are the next steps after a catastrophic firearm failure like this?

Following such an incident, it is recommended to cease using the firearm, document the damage, and contact the manufacturer's customer service to report the issue and seek resolution, potentially involving warranty service or investigation into defects.

More Gunsmithing & DIY Videos You Might Like

More from The VSO Gun Channel

View all →