NEVER BUY CANNED MEAT AGAIN | Easiest Method To Preserve Meat - Step By Step

Published on March 10, 2019
Duration: 56:41

This guide details a step-by-step method for canning beef roast and meatloaf using the cold pack method and a T-fal Pressure Canner. The process emphasizes safety, proper jar sealing, and long-term food preservation techniques, as demonstrated by Alaska Prepper. It covers meat preparation, seasoning, packing, and the pressure canning procedure for optimal results.

Quick Summary

The easiest method to preserve meat involves the cold pack technique using a pressure canner. Prepare meat by cubing or forming into a meatloaf, pack into jars with adequate headspace, and process for 90 minutes at 10-15 PSI. Ensure proper sealing by cleaning rims and tightening lids, then check for seals upon cooling.

Chapters

  1. 00:00Introduction to Meat Canning
  2. 01:46Jar Selection and Processing Times
  3. 03:59Meat Preparation and Knife Safety
  4. 11:42Packing Beef Cubes
  5. 16:13Seasoning Meatloaf for Canning
  6. 28:56Packing Meatloaf and Jar Sealing
  7. 35:25Pressure Canning Process
  8. 43:30Final Results and Storage

Frequently Asked Questions

What is the recommended processing time for canning meat using the cold pack method?

For canning meat, including beef roast and meatloaf, the recommended processing time is 90 minutes at 10-15 PSI in a pressure canner. This extended time ensures maximum safety against potential spoilage and pathogens.

How should beef cubes be packed into jars for canning?

Beef cubes should be packed tightly into pint-sized jars, leaving about one inch of headspace. No additional liquid is needed, as the meat will release its own juices during the pressure canning process.

What are the key steps for ensuring a proper seal on canned jars?

To ensure a proper seal, wipe jar rims clean with white vinegar before applying lids. Tighten lids to 'finger tight' and process according to recommended times and pressure. Listen for the 'click' as jars cool to confirm a seal.

Why is it important to vent a pressure canner before reaching pressure?

Venting the pressure canner for 10 minutes before reaching the target pressure (10-15 PSI) is crucial. This process removes air from the canner, ensuring the internal temperature accurately reflects the pressure, leading to safe and effective processing.

More Hunting & Outdoors Videos You Might Like

More from Alaska Prepper

View all →