50 Layers Of Kevlar Stops Rifle!!! 😲😲😲 #trendingshorts #kevlar #bodyarmor #rifle

Published on May 22, 2023
Duration: 1:00

This video demonstrates the ballistic resistance of 50 layers of Kevlar material against a 5.56x45mm M193 round fired from a 16-inch barrel. The test reveals that 45 layers of the Kevlar were sufficient to stop the projectile, although the impact caused a blowout in the rear of the panel. The remaining 5 layers were completely blown out.

Quick Summary

In a ballistic test, 45 layers of a 1.25-inch thick Kevlar material successfully stopped a 5.56x45mm M193 rifle round fired from a 16-inch barrel. While the projectile was halted, the impact caused a blowout in the rear of the panel, with the final 5 layers being completely displaced.

Chapters

  1. 00:02Introducing 50 Layers of Kevlar
  2. 00:10Test Setup: 5.56 Rifle and M193 Round
  3. 00:23Post-Impact Observation
  4. 00:37Rear Blowout Analysis
  5. 00:43Layering and Projectile Stop
  6. 00:55Conclusion: 45 Layers Stopped the 5.56

Frequently Asked Questions

How many layers of Kevlar stopped a 5.56 rifle round?

In this ballistic test, 45 layers of a specific Kevlar material, measuring approximately 1.25 inches thick, were sufficient to stop a 5.56x45mm M193 round fired from a 16-inch barrel. The impact did cause a blowout in the rear of the panel.

What type of rifle round was used in the Kevlar test?

The ballistic test utilized a 5.56x45mm rifle round, specifically identified as an M193 type. This round was fired from a 16-inch barrel to assess the protective capabilities of the Kevlar material.

What was the thickness of the Kevlar tested against the rifle round?

The ballistic panel consisted of 50 layers of Kevlar material, resulting in a total thickness of approximately 1.25 inches. The test determined that 45 of these layers were required to stop the 5.56x45mm rifle projectile.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Predator Armor

View all →