Install Your Scope Diving Board Like a PRO in Minutes! Area 419 Scope Mount

Published on December 4, 2024
Duration: 0:49

This guide details the professional installation of an Area 419 'diving board' scope mount accessory. It emphasizes pre-installation steps like applying Vibratite to bolts and highlights critical components such as the non-removable set screw and the 45 inch-pounds torque specification. The process involves aligning tapered bosses for a secure fit onto the tack cap, following specific step-torque instructions.

Quick Summary

Install your Area 419 scope mount 'diving board' like a pro by applying Vibratite to bolts for proper thread engagement. Note the non-removable set screw and the 45 inch-pounds torque specification. Align tapered bosses on the diving board with the tack cap for a secure fit, following step-torque instructions.

Chapters

  1. 00:00Pre-installation Prep with Vibratite
  2. 00:08Understanding Scope Mount Set Screws & Torque
  3. 00:29Beginning the Diving Board Installation
  4. 00:33Aligning Diving Board with Mount

Frequently Asked Questions

What is the recommended torque setting for the Area 419 scope mount diving board?

The Area 419 scope mount diving board accessory has a clearly engraved torque specification of 45 inch-pounds. It's crucial to use a torque wrench to achieve this precise tightness for a secure and reliable installation.

Should the set screw on the Area 419 scope mount be removed during installation?

No, the video explicitly states that the hollow set screw on the Area 419 scope mount accessory is not to be removed. It plays a role in retaining a component and should be left in place.

What preparation is recommended before installing the Area 419 scope mount diving board?

Before installation, it is recommended to apply Vibratite to the bolts of the scope mount. This ensures proper thread engagement, which is essential for a secure and lasting installation of the accessory.

How do you ensure the Area 419 scope mount diving board is correctly aligned?

The installation instructions specify placing the 'diving board' onto the 'tack cap' and aligning specific tapered bosses. This precise alignment is key for a secure and correct fit of the accessory onto the scope mount.

More Tactical & Gear Videos You Might Like

More from Paramount Tactical

View all →