Day 9

Published on December 27, 2022
Duration: 16:15

This video details a comprehensive test of reloaded shotshells, comparing the performance of different crimp styles (roll vs. fold) and shell lengths (2.75-inch vs. 3-inch). The instructor meticulously records chronograph data, inspects fired components for anomalies, and analyzes the results to understand how crimp variations affect velocity. The testing highlights the importance of careful component inspection and data collection in the reloading process.

Quick Summary

Reloading shotshells involves testing different crimp styles like roll and fold crimps, and shell lengths such as 2.75-inch and 3-inch. The 2.75-inch roll-crimp load achieved the highest velocity (1259 fps), while fold crimps showed similar velocities. Component inspection reveals shot setback and wad durability.

Chapters

  1. 00:00Introduction & Test Setup
  2. 00:22Reloaded Shell Configurations
  3. 00:42Testing 2.75" Roll Crimp Load
  4. 01:15Testing 3" Loads & Chronograph Readings
  5. 01:56Chronograph Data Analysis
  6. 02:22Comparing Crimp Styles & Velocities
  7. 02:46Potential Reasons for Velocity Differences
  8. 03:36Inspecting Fired Wads & Components
  9. 04:50Wad Durability & Setback Observations
  10. 05:24Comparing Loaded vs. Fired Shells
  11. 05:57Hull Preparation: Skived vs. Unskived
  12. 06:27Impact of Wad Setup on Velocity
  13. 06:50Future Testing Ideas
  14. 07:05Buffer & Overshot Cards Explained
  15. 07:55Reloading Wad Seating Discussion
  16. 08:73Fold Crimp Technique & Challenges
  17. 09:00Conclusion & Future Plans

Frequently Asked Questions

What are the key differences between roll crimps and fold crimps in shotshell reloading?

Roll crimps create a rounded, inward turn at the hull mouth, often used for slugs or specific loads. Fold crimps involve multiple points (e.g., 6 or 8) that are folded inward, typically used for shot loads. The video tests both types to compare their impact on velocity and component integrity.

How does shell length affect shotshell reloading performance?

The video suggests shell length can influence velocity. A 2.75-inch shell with a roll crimp achieved higher velocities than 3-inch shells, potentially due to differences in crimp strength, hull preparation (skived vs. cut), and wad configurations.

What is shot setback in shotshells?

Shot setback is the initial compression of the shot column into the wad cup when pressure builds during firing. Inspecting wads can reveal the depth of this setback, offering insights into the forces acting on the shot column as it begins its journey.

Can reloaded shotshells be reloaded multiple times?

Yes, reloaded shotshells can typically be reloaded multiple times. The instructor expects to get 1-2 reloads from roll-crimped hulls before they need to be trimmed down for re-crimping, indicating good durability for common reloading practices.

Related News

All News →

More Training & Techniques Videos You Might Like

More from Johnny's Reloading Bench

View all →