Gun Cleaning; Bear Ammo; Why Rifles like Certain Ammo Loads: Gun Talk Radio| 7.9.17

Published on July 10, 2017
Duration: 44:23

This discussion covers effective methods for cleaning firearm barrels, particularly addressing stubborn copper and lead fouling. It emphasizes that for handguns, achieving 'good enough' cleanliness is often sufficient for accuracy, while rifle barrels may require more meticulous cleaning until patches come out clean. Several cleaning products are recommended, with specific advice on aggressive cleaners like Sweet's 7.62 and less toxic options like Slip 2000. The segment also touches on the importance of copper removal for rifle accuracy and the concept of barrel harmonics influencing ammunition choice.

Quick Summary

For stubborn copper fouling in firearm barrels, aggressive cleaners like Sweet's 7.62 Bore Cleaner are effective but require short contact times. JB Bore Paste is another option. For a less toxic and reusable alternative, Slip 2000 Carbon Killer is recommended for dissolving carbon and lead. For handguns, 'good enough' cleanliness is often sufficient for accuracy, while rifle barrels benefit from more thorough cleaning to remove copper fouling.

Chapters

  1. 00:00Introduction to Crimson Trace Laser Sights
  2. 00:24Gun Talk Radio Intro
  3. 01:33Caller George: Handgun Barrel Cleaning Problem
  4. 03:36Recommended Bore Cleaners: Hoppe's, Sweet's, JB Paste
  5. 05:32Slip 2000 Gun Cleaning System
  6. 07:03Caller Phillip: Rifle Barrel Cleaning & Accuracy
  7. 07:51Buffalo Bore & DoubleTap Ammunition for Bear Defense
  8. 12:18Caller Tim: Matching Rifle to Ammunition
  9. 13:27Understanding Barrel Harmonics and Ammo Choice
  10. 15:27Premium Hunting Bullet Recommendations
  11. 17:37Caller Chris: Historical Gun Cleaning Methods
  12. 19:36Survival Gun Cleaning & Homemade Solutions
  13. 20:22Primer Construction and Function
  14. 23:13Caller Blues: Brake Cleaner for AR-15 Cleaning
  15. 25:15Caller John: Rogers Advanced Gun Cleaning System
  16. 27:21Caller Jeff: Nosler Partition Bullet Performance
  17. 32:20Critique of Gun Buyback Programs
  18. 35:46Caller Larry: Finding Ammo for Winchester 70 Super-Short Mag
  19. 37:36Ammoseek.com for Ammo Availability
  20. 38:21Caller Mel: Subsonic Ammo with Suppressors
  21. 39:46Caller Mike: Media Coverage of Gun Violence Marches
  22. 40:51FBI Data on Gun Violence Reduction

Frequently Asked Questions

What are the best cleaning products for stubborn copper fouling in firearm barrels?

For stubborn copper fouling, aggressive cleaners like Sweet's 7.62 Bore Cleaner are highly effective, though they require short contact times. JB Bore Paste is another option. For a less toxic and reusable alternative, Slip 2000 Carbon Killer is recommended for dissolving carbon and lead.

How clean does a handgun barrel need to be for optimal accuracy?

For handguns, achieving a 'good enough' level of cleanliness is often sufficient. Overly aggressive cleaning may not significantly improve practical accuracy, as the barrel will re-foul with subsequent shots. Focus on removing major fouling rather than achieving a mirror finish.

Why is matching ammunition to a rifle's harmonics important?

Matching ammunition to a rifle's harmonics is crucial for accuracy because it minimizes barrel whip and vibration during firing. When the barrel's harmonics align with the bullet's exit, it results in smaller, more consistent groups on target. This is often achieved through handloading or testing factory loads.

What are the risks of using brake cleaner for gun cleaning?

Brake cleaner is an aggressive degreaser that can be effective but strips all oils and rust preventatives from metal surfaces. It's crucial to wear protective eyewear as it can cause severe eye irritation. After using brake cleaner, it's essential to immediately reapply lubricants and rust inhibitors to prevent corrosion, especially in humid environments.

More Training & Techniques Videos You Might Like

More from Gun Talk Media

View all →