The Dumbest Things I've Done With Guns

Published on February 20, 2026
Duration: 15:57

This video details five dangerous mistakes made with firearms, ranging from shooting bricks with a pellet gun to mishandling primers during reloading. The speaker, a self-proclaimed gun enthusiast, emphasizes the importance of safety, proper reloading procedures, and understanding ammunition characteristics to avoid severe injury. Key takeaways include the dangers of shooting pitted steel, the risks of starting with max charges in wildcat cartridges, and the critical need for caution when annealing brass with primers still in the case.

Quick Summary

Five critical firearm mistakes are detailed, including shooting bricks with a pellet gun, dangerous wildcat cartridge reloading, shooting pitted steel, experimenting with 50 BMG muzzle blast, and a primer explosion during reloading. The speaker emphasizes safety, proper reloading techniques, and understanding ammunition to prevent severe injuries.

Chapters

  1. 00:00Introduction: Guns are not toys
  2. 00:14Mistake 1: Shooting Bricks with Pellet Gun
  3. 02:10Raid Shadow Legends Ad
  4. 03:40Mistake 2: Wildcat Cartridge Reloading Disaster
  5. 06:36Mistake 3: Shooting Pitted Steel Targets
  6. 08:13Mistake 4: 50 BMG Muzzle Blast Experiment
  7. 10:13Honorable Mention: 30 Carbine Blow Up
  8. 11:09Mistake 5: Primer Explosion on Finger
  9. 15:33Conclusion: Take Your Time, Be Safe

Frequently Asked Questions

What are the dangers of shooting pitted steel targets?

Shooting at pitted steel targets is dangerous because the pits can act like rifling, causing bullets to fragment and ricochet back at high velocities, potentially causing serious injury. Always inspect targets for pitting before shooting.

Why is it dangerous to start with a max powder charge when reloading?

Starting with a max powder charge, especially in wildcat cartridges or in hot weather, can lead to dangerously high pressures. This can cause case head separation, damage firearm components like bolt lugs, and result in catastrophic failure.

What is the risk associated with annealing brass cases with primers still in them?

Annealing brass cases with a live primer still seated is extremely dangerous. The heat can ignite the primer, causing a violent explosion that can send fragments flying and cause severe injury, as demonstrated by the speaker's experience.

What are the key differences between fake and real 30 Carbine ammunition?

Fake 30 Carbine rounds, often imported, are typically Berdan primed with two flash holes. Genuine American Lake City rounds are Boxer primed with a single flash hole. Using counterfeit ammunition can lead to firearm damage.

More Training & Techniques Videos You Might Like

More from Banana Ballistics

View all →