223 Rem - 50gr Hornady Z-Max/V-Max with Varget & PP Varmint

Published on February 20, 2018
Duration: 23:32

This video details the reloading process for .223 Remington using 50gr Hornady Z-Max/V-Max bullets with Varget and Alliant Power Pro Varmint powders. The test rifle, an 18-inch AR-15, achieved excellent accuracy with both powders, with Power Pro Varmint yielding higher velocities and Varget providing very consistent groups. No pressure signs were observed on the Lake City brass even at maximum loads.

Quick Summary

Reloading .223 Remington with 50gr Hornady V-Max bullets using Varget and Alliant Power Pro Varmint powders yielded excellent accuracy. Power Pro Varmint achieved velocities up to 3215 fps with a 0.470-inch group, while Varget provided consistent groups around 0.561 inches.

Chapters

  1. 00:00Introduction & Bullet Choice
  2. 01:53Load Data Analysis: Varget & PP Varmint
  3. 03:33Component Prep: Brass & Primers
  4. 04:06Powder Charging & Bullet Seating
  5. 10:38Range Test Setup & Rifle Specs
  6. 11:32Results: Power Pro Varmint Loads
  7. 15:07Results: Varget Loads
  8. 17:21Final Analysis & Conclusion

Frequently Asked Questions

What powders were tested for reloading .223 Remington with 50gr Hornady V-Max bullets?

The video tested two main powders for reloading .223 Remington with 50gr Hornady V-Max bullets: Hodgdon Varget and Alliant Power Pro Varmint. Load data was extrapolated and tested within specific ranges for each powder.

What were the accuracy results for the reloaded .223 Remington cartridges?

The reloaded .223 Remington cartridges showed excellent accuracy. The best group with Power Pro Varmint was 0.470 inches, and the best group with Varget was 0.561 inches, both achieved at 100 yards.

What is the recommended Overall Length (OAL) for .223 Remington reloads in an AR-15?

For reliable magazine feeding in an AR-15 platform, the recommended Overall Length (OAL) for .223 Remington reloads is 2.240 inches. This was the target length used in the video.

Were there any signs of excessive pressure with the tested .223 Remington loads?

No, there were no signs of excessive pressure observed on the Lake City brass, even when using maximum charge weights for both Varget and Power Pro Varmint powders. This indicates the tested load ranges were safe.

Related News

All News →

More General Videos You Might Like

More from Johnny's Reloading Bench

View all →