IWI US Expert's Corner: IWI Masada Slim Disassembly and Mag Release Change

This guide details the disassembly and reassembly of a Ruger Mini-14 trigger group, prompted by a failure where the trigger group "flew apart." It covers identifying broken parts and reassembling the receiver. The speaker, demonstrating experienced authority, highlights a common failure point and the process of repair.

This video details the historical development and technical specifications of the US M1 Garand rifle, focusing on the early 'gas trap' variant. It covers the extensive trials and design iterations that led to its adoption, including the contributions of John Garand and competitors. The video provides a close examination of the gas trap mechanism, its disassembly, and its operational principles, highlighting its strengths and weaknesses compared to later designs.

This video provides a practical tip for firearm owners: create printed photographic guides for disassembly and reassembly. By taking pictures as you take a gun apart, you can create a visual reference that significantly simplifies the reassembly process, especially for firearms that are not worked on frequently or are particularly complex. This method is highly recommended for avoiding confusion and ensuring correct reassembly.

This YouTube Shorts video provides a quick guide on how to disassemble the Sig Sauer M17 pistol. The focus is on the practical, step-by-step process of taking the firearm apart, likely for cleaning, maintenance, or familiarization. Given the short format, it's a visual demonstration rather than an in-depth technical explanation.

This guide details the process of replacing the mainspring on a Swiss Luger 1900. It covers identifying a failed mainspring, the correct direction for removal, manipulating the grip safety, compressing and installing the new spring with safety precautions, and reassembly. The new spring is noted to be significantly stiffer, requiring a specific operational technique for this model.

This guide details the disassembly process for a specific 19th-century Warner revolving carbine, highlighting its unique design that omits a traditional ramrod and loading lever. The process involves removing a single screw to detach the barrel assembly, which then rotates and slides off. This method is distinct from typical percussion revolvers.

This video provides a step-by-step guide to disassembling and reassembling the IWI Masada Slim pistol. Instructor Tom Alabrando emphasizes safety checks, including verifying the firearm is unloaded and the chamber is clear. He details the unique forward-moving tear-down lever and the importance of aligning specific cuts for pin insertion during reassembly, noting that the trigger does not need to be pulled for disassembly.

This guide details the disassembly and reassembly process for the IWI US Carmel rifle, presented by Tom Alabrando of IWI US. It covers field stripping the bolt group, trigger assembly, and gas regulator/piston, along with crucial reassembly steps and a function test. The instruction emphasizes proper alignment and the use of common tools for maintenance.

This guide details the disassembly and reassembly of the IWI Masada full-size pistol, focusing on removing and reinstalling the firing pin assembly and the magazine release lever. It emphasizes proper alignment of internal components and includes troubleshooting for common reassembly errors, such as a dead trigger due to incorrect spring seating. The instruction is provided by Tom from IWI US, offering expert insights into maintaining the firearm.

This guide details the disassembly of the newer generation IWI Tavor X95 bolt group, distinguishing it from older variants. It highlights the differences in the bolt rotation control bar and piston design, and provides a method for disengaging the bar to remove the bolt guide pin for full disassembly. The instruction comes from Tom Alando of IWI.