Testing 700 Nitro In A Shotgun 😳

Published on January 5, 2022
Duration: 14:38

This guide details an experimental procedure for testing the limits of a 10 gauge shotgun by firing a high-pressure 700 Nitro Express round and intentionally obstructing the barrel. The experiment, conducted by Scott from Kentucky Ballistics, highlights firearm durability under extreme stress, culminating in a barrel split. It emphasizes safety through the use of remote firing equipment and a Lead Sled.

Quick Summary

Kentucky Ballistics tested the limits of a Partner Single Shot 10 Gauge shotgun by firing a 700 Nitro Express round. Using a Caldwell Lead Sled and remote trigger for safety, they observed reduced velocity due to gas seal issues. Subsequent intentional barrel obstructions led to a catastrophic failure, splitting the barrel.

Chapters

  1. 00:00Intro Skit
  2. 01:11Experiment Introduction
  3. 01:59Baseline Testing
  4. 04:06700 Nitro Express Test
  5. 07:43Barrel Obstruction Testing
  6. 11:06Catastrophic Failure

Frequently Asked Questions

What happened when a 700 Nitro Express round was fired from a 10 gauge shotgun?

When a 700 Nitro Express round was fired from a 10 gauge shotgun, it did discharge, but with significantly reduced velocity due to a poor gas seal. The experiment later involved intentional barrel obstructions, which ultimately caused the shotgun's barrel to split.

How was safety ensured during the extreme ammunition test?

Safety was prioritized by using a Caldwell Lead Sled for remote firing and a remote trigger system. This allowed the operator to remain at a safe distance during the firing of the high-pressure 700 Nitro Express round and subsequent obstruction tests.

What was the outcome of intentionally obstructing the shotgun barrel?

Intentionally obstructing the shotgun barrel with mud and then firing the weapon repeatedly under these high-pressure conditions led to a catastrophic failure. The visual evidence clearly shows the barrel splitting open after multiple tests.

What type of shotgun was used for the 700 Nitro Express test?

The firearm used for testing the 700 Nitro Express round was a Partner Single Shot 10 Gauge shotgun. This break-action firearm has a capacity of one round and was subjected to extreme pressure conditions during the experiment.

More Gunsmithing & DIY Videos You Might Like

More from Kentucky Ballistics

View all β†’