Is This Massive Wrench Bulletproof?

Published on April 8, 2026
Duration: 1:35

This video tests the bulletproof capabilities of a 24-inch pipe wrench against various calibers, from .22 LR to .50 BMG. While it withstands smaller rounds like birdshot, .22 LR, and 9mm with only superficial damage, larger calibers like .308 Winchester cause significant deformation. The .50 BMG round completely destroys the wrench's internal gear mechanism, demonstrating its limitations against high-powered rifle cartridges.

Quick Summary

A 24-inch pipe wrench was tested against various calibers, from .22 LR to .50 BMG. It successfully stopped 9mm rounds without penetration. However, .308 Winchester caused significant deformation, and a .50 BMG round completely destroyed the wrench's internal mechanism, proving it is not bulletproof against high-powered rifle cartridges.

Chapters

  1. 00:00Introduction: Pipe Wrench Bulletproof Test
  2. 00:03Calibers to be Tested
  3. 00:21Testing with Birdshot
  4. 00:25.22 LR Impact Test
  5. 00:379mm Impact Test
  6. 00:427.62x39mm Impact Test
  7. 00:54.308 Winchester Impact Test
  8. 01:13.50 BMG Impact Test
  9. 01:20.50 BMG Damage Analysis

Frequently Asked Questions

Can a 24-inch pipe wrench stop common handgun rounds like 9mm?

Yes, a 24-inch pipe wrench demonstrated the ability to stop 9mm rounds without penetration. While there might be surface marks or slight deformation, the wrench's material was sufficient to prevent the bullet from passing through.

How does a pipe wrench perform against rifle calibers like .308 Winchester?

Against .308 Winchester, a 24-inch pipe wrench showed significant deformation with clean entrance wounds. However, it did not fully penetrate both layers of the wrench, resulting in a bulge on the backside rather than a complete pass-through.

What happens when a 50 BMG round hits a pipe wrench?

A .50 BMG round completely destroys the internal gear mechanism of a 24-inch pipe wrench. The extreme force and energy of this caliber are far beyond the structural integrity of the tool, rendering it non-functional.

Is a pipe wrench considered bulletproof against all firearm calibers?

No, a pipe wrench is not bulletproof against all firearm calibers. While it can stop smaller rounds like .22 LR and 9mm, it is significantly damaged by .308 Winchester and completely destroyed by a .50 BMG round.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Civilian Tactical

View all →