Quantos travesseiros para abafar tiros de diferentes calibres? (Teste 50 BMG)

This video tests the bulletproof capabilities of a 24-inch pipe wrench against various calibers, from .22 LR to .50 BMG. While it withstands smaller rounds like birdshot, .22 LR, and 9mm with only superficial damage, larger calibers like .308 Winchester cause significant deformation. The .50 BMG round completely destroys the wrench's internal gear mechanism, demonstrating its limitations against high-powered rifle cartridges.

This video details a significant surge in demand for nine specific ammunition calibers in early 2025, driven by a combination of factors including fear of recession, increased concealed carry, potential new regulations, legislative threats, fear of civil unrest, affordability, popularity for long-distance and suppressed shooting, home defense needs, seasonal hunting cycles, and anticipation of pre-ban stockpiling. The speaker highlights the primary reasons behind each caliber's increased demand.

This video tests the ballistic resistance of a 100-pound block of lead against various firearm calibers, from .22LR up to .50 BMG. The experiment demonstrates how different rounds interact with soft lead, showing deformation and penetration depths. Notably, the .50 BMG round successfully penetrated the entire lead block and a target behind it, highlighting the extreme power of this caliber.

This video tests the ballistic resistance of steel-toe boots against various calibers, from .22LR up to .50 BMG. While smaller calibers like .22LR and .380 ACP were completely stopped with minimal deformation, larger calibers like 9mm and .45 ACP caused significant bulging and potential toe injury, though they were still stopped. The .44 Magnum partially penetrated the steel on one attempt, and the 50 AE and 50 BMG successfully penetrated the steel toe, rendering the boots ineffective against these high-powered rounds.

This video tests the ballistic resistance of a sledgehammer against various calibers, from .22 LR to .50 BMG. It demonstrates that even smaller rounds cause superficial damage, while larger calibers like 7.62x39mm and 5.56mm create significant dents and fragmentation. The .50 BMG round causes the most substantial damage, but the hammer remains intact, suggesting a high degree of ballistic resistance.

This video tests the ballistic resistance of a 24-inch adjustable wrench against various calibers, from .22 LR to .50 BMG. The wrench demonstrated significant durability, withstanding multiple impacts from intermediate rifle cartridges and even showing resistance to .308 Winchester. The .50 BMG round, however, completely destroyed the wrench's internal gearing mechanism.

This video explores the compatibility of a 50 BMG cartridge with a 12 gauge flare gun. The experiment reveals that while the cartridge fits, the flare gun's mechanism cannot ignite the tough 50 BMG primers. However, it successfully fires a standard 12 gauge blank, highlighting the difference in primer hardness. The content is presented from a hobbyist perspective, focusing on experimental curiosity rather than professional instruction.

This video from Tática Civil, featuring an expert instructor, explains the dangers of firing upwards due to projectile drop and terminal velocity. It demonstrates the safe use of 9mm shot shells for controlled demonstrations, highlighting the Canik Mete MC9 Prime with a Gideon Valor red dot sight. The instructor emphasizes crucial firearm safety protocols.

This guide details an experimental test to debunk the myth that a .50 BMG round passing near a target can be lethal. Using a ballistic mannequin, cardboard indicators, and a concrete backstop, the test demonstrates that a near miss from a .50 BMG round does not impart enough shockwave or air pressure to cause fatal injury, though the projectile itself possesses immense kinetic energy as evidenced by its impact on the concrete block. The test was conducted objectively by an individual with high authority, indicated by their empirical testing methods and proper safety protocols.

This video demonstrates a dramatic comparison between the .22 LR and .50 BMG calibers using a ballistic head model. The .50 BMG, when attached to an AR-15 platform via a Raptor upper, shows vastly superior destructive power, completely obliterating the model, while the .22 LR causes only superficial damage. The host's enthusiastic and experimental approach, combined with clear technical explanations, highlights the significant energy difference between these two rounds.