6 Secrets For Sighting In Your Rifle

Published on October 3, 2024
Duration: 17:12

This guide details a methodical approach to sighting in a rifle, emphasizing a 50-yard bore sight start and understanding bullet trajectory. The host, demonstrating high authority from practical experience, advises on scope adjustments, accounting for barrel heat, and using tools like Turret Tags for field efficiency. The process involves multiple shot groups with cooling intervals for accurate final adjustments.

Quick Summary

Start sighting in your rifle at 50 yards for precise initial paper acquisition. Understand that scope adjustments require double the clicks at 50 yards compared to 100 yards (e.g., 8 clicks for 1 inch at 50 vs. 4 at 100 for MOA). Allow for barrel cooling between shot groups to account for heat shifts and ensure an accurate final zero.

Chapters

  1. 00:20Common Sighting Misconceptions
  2. 01:18The 50-Yard Bore Sight Secret
  3. 03:44Scope Adjustment Math
  4. 04:31Understanding Trajectory
  5. 08:13Sighting Tips & The Party Trick Method
  6. 09:35Last Click Verification
  7. 15:06Turret Tags for Field Adjustments

Frequently Asked Questions

What is the recommended starting distance for sighting in a rifle?

The video recommends starting at exactly 50 yards for bore sighting. This distance is considered more precise for initial paper acquisition than 100 yards, helping to save time and ammunition during the zeroing process.

How do scope adjustments differ between 50 and 100 yards?

When adjusting scope turrets, you must double the number of clicks for 50 yards compared to 100 yards. For example, 8 clicks move the point of impact 1 inch at 50 yards, whereas only 4 clicks are needed for 1 inch at 100 yards with an MOA scope.

What is the 'Party Trick' method for sighting in a rifle?

The 'Party Trick' involves locking the gun down, firing a shot, keeping the reticle on the center of the target, and then adjusting the scope turrets until the reticle moves directly onto the bullet hole. This is an alternative if visual bore sighting is difficult.

Why is it important to allow for cooling between shot groups?

Allowing for cooling intervals (e.g., 7 minutes between groups) between shots helps mitigate the effects of barrel heat and 'cold bore' versus 'hot barrel' shifts, ensuring more accurate and consistent final adjustments for your rifle's zero.

More Training & Techniques Videos You Might Like

More from Backfire

View all →