Podcast!

This video details a catastrophic failure of a Serbu RN-50 rifle chambered in .50 BMG, which exploded due to extreme pressure exceeding 85,000 PSI. The incident resulted in severe injuries to the shooter, Scott, including a broken orbital bone, nose, lacerated jugular vein, and punctured lung. The analysis points to the breech cap shearing off its threads as the failure point, highlighting the dangers of exceeding firearm pressure limits.

This video details the advanced manufacturing process for a round steel tube, likely a firearm component like a handguard or suppressor body. It highlights the use of high-end tooling, including carbide-tipped drills and CNC machining with axis substitution for precise hole chamfering on curved surfaces. The process also incorporates efficient G-code programming with loops and variables, followed by vibratory deburring and sandblasting for a professional finish.

This video showcases the destructive power of a 20mm round fired from the Typhon 20 rifle against giant gummy bears. It features a comparison with a 7.62x39mm round, high-speed slow-motion footage of the impact, and analysis of the projectile's effect. The demonstration highlights the significant kinetic energy transfer of the large caliber round.

This video demonstrates the destructive power of a 20mm rifle against a cast-iron fire hydrant. The initial shot created a clean entry and a jagged exit hole, while a second shot with a practice round completely shattered the hydrant's body. The experiment highlights the brittle nature of cast iron when subjected to high-velocity impacts and the significant energy of 20mm ordnance.

This video tests 20mm tungsten and armor-piercing rounds against a 1.5-inch titanium plate. The tungsten round achieved nearly 1-inch penetration, causing significant deformation but not full penetration, while the AP round created a 0.5-inch deep crater. The experiment highlights the extreme capabilities of high-caliber ammunition against advanced materials.

This video showcases a full-automatic Uzi in a desert environment, with Edwin Sarkissian demonstrating its high rate of fire and smooth action. The footage includes live-fire sequences, slow-motion analysis of the cycling action and bullet impacts, and a post-fire review highlighting the weapon's manageable recoil. The video emphasizes safe weapon handling and provides technical specifications for the Uzi.

Mark Serbu details the complex process of converting a CNC lathe into a 12-barrel blank-firing machine gun. The project highlights the critical role of a lathe's C Axis for precise rotational control and the application of PID control theory to overcome initial firing failures. Modifications were made to ensure the device fires blanks only, avoiding legal issues.

This video demonstrates how to rifle a barrel in a home shop using basic tools, bypassing expensive CNC equipment. It covers material preparation, precise drilling and reaming, and the critical process of pushing a rifling button. While a DIY approach is shown to be possible, the video highlights the significant difference in quality and precision achievable with professional CNC machining.

This video provides an in-depth analysis of the Serbu RN-50 rifle that experienced a catastrophic failure during a Kentucky Ballistics test. Mark Serbu, the designer, meticulously examines the damage, noting severely bent steel side plates, sheared-off breech cap ears, and a sheared pivot pin. The inspection also covers the breech cap's condition, barrel threads, and the stuck casing, revealing a case head separation.

Mark Serbu, designer of the RN-50, addresses a catastrophic failure experienced by Kentucky Ballistics. He reassures customers about the RN-50's safety, attributing the incident to counterfeit or over-pressured ammunition. Serbu highlights the rarity of such events and emphasizes industry transparency, noting that his company has produced approximately 1,400 RN-50s since 2016 with hundreds of thousands of rounds fired without issue.