AR-15 - Receiver Dimension Variances & BAD-ASS

This guide details the process of lapping an AR-15 receiver to ensure proper barrel alignment for improved long-range accuracy. Instructor Stephen Caleb from Brownells explains that receiver faces can be slightly out of alignment, leading to barrel runout. The process involves using a specialized lapping fixture and aluminum oxide lapping compound with a drill to create a perfectly flat receiver face. This ensures the barrel seats flush and square, critical for precision shooting beyond 500 yards.

This guide details the installation of an aftermarket AR-15 trigger, specifically a Timney Triggers product, into a clear lower receiver. The process involves unboxing, component inspection, mounting the trigger assembly with pins, and performing a function check. The demonstrative tone and clear handling of components suggest an experienced instructor guiding the viewer through a common firearm modification.

This expert guide from the School of the American Rifle details how to identify and address rough carrier key bores in AR-15 bolt carrier groups. The instructor, demonstrating expert knowledge, explains how these manufacturing defects, particularly on Colt components, can lead to premature wear on the gas tube and reduced reliability. Solutions involve replacing the defective carrier key to ensure smooth operation and longevity of the firearm.

This guide details how to adjust an AR-15's adjustable trigger, focusing on reducing pre-travel and overtravel for a crisper break. It emphasizes safety checks and the use of a trigger pull gauge. The video, presented by an expert from AT3 Tactical, explains that adjustable triggers offer customization for accuracy and performance, particularly for competition shooters and range enthusiasts, but may not be ideal for home defense or casual use due to potential safety concerns if set too light.

This guide details the installation of the LaRue MBT-2S trigger for AR-platform rifles, based on insights from Concrete Cowboy. The video highlights the trigger's origin story, its 4-4.5 pound pull weight with a solid wall and clean break, and the speaker's positive long-term experience. It emphasizes the value proposition of a premium feel at a reduced cost.

This guide details the comparison and installation considerations for popular AR-15 triggers, including the LaRue MBT-2S, Geissele SSA-E, and TriggerTech Duty. It covers the functional differences between single-stage and two-stage triggers, as well as cassette versus traditional designs. The expert-driven content from Concrete Cowboy provides insights into pull weights, reset, and installation ease, aiding builders in selecting the best trigger for their AR-15 platform.

This guide provides expert instruction from nsz85 on how to properly load a 75-round drum magazine for the AK-47 rifle. It covers identifying components, resetting the follower, the specific loading procedure for rounds, winding the spring for tension, and crucial advice on releasing tension for storage to preserve spring life. The video emphasizes clear, step-by-step technical guidance for reliable firearm operation.

This guide details the basic field stripping and reassembly of an AR-15, as demonstrated by nsz85. It covers separating the upper and lower receivers, removing the bolt carrier group and charging handle, and reassembling the firearm. The video emphasizes proper magazine seating and the function of various controls. Instruction comes from an experienced individual with clear, practical advice for beginners.

This guide details the process of installing a standard A2 style flash hider onto an AR-15 platform, specifically a 10.5-inch Rainier Arms barrel. It covers necessary tools, thread preparation with AeroShell 33MS grease, crush washer orientation, and the critical step of indexing the muzzle device for optimal performance, especially when shooting prone. The instruction emphasizes precise alignment with the gas port for proper function.

This guide details the critical process of checking headspace on an AR-15 build, a vital step for ensuring firearm safety and reliability. Professional gunsmith Dale Heckstrom from Little Crow Gunworks demonstrates the disassembly of the bolt carrier group, the precise use of 'Go' and 'No-Go' gauges, and the reassembly process. Proper headspace ensures the firearm operates within safe mechanical tolerances, preventing potential malfunctions or dangerous failures due to factory defects or mismatched components.