AR Pistol Beats Rifle

This video tests the bullet resistance of a Soviet-era hammer against various calibers of ammunition, from birdshot to .50 BMG. The hammer's head showed minimal damage from smaller calibers, with paint chips and small craters, but was significantly penetrated and damaged by larger rounds like 7.62x39mm and .308 Winchester.

This video tests the bullet resistance of a 2-lb rubber mallet against various calibers, from birdshot to .50 BMG. The mallet demonstrates surprising durability, absorbing impacts from smaller calibers without penetration. However, larger calibers like .223 Remington shatter the handle, and .308 Winchester penetrates the head. The experiment highlights the potential for unexpected stopping power in common tools.

This video tests the ballistic resistance of a sledgehammer against various calibers, from .22 LR to .50 BMG. It demonstrates that even smaller rounds cause superficial damage, while larger calibers like 7.62x39mm and 5.56mm create significant dents and fragmentation. The .50 BMG round causes the most substantial damage, but the hammer remains intact, suggesting a high degree of ballistic resistance.

This video tests the bullet resistance of a sledgehammer against various calibers, from .22 LR to .50 BMG. The sledgehammer demonstrates significant resistance, with no caliber achieving a complete pass-through. Notably, even larger calibers like 7.62x39mm and 5.56x45mm NATO caused significant denting and bullet fragmentation, while the .50 BMG created a substantial divot. The experiment concludes that a sledgehammer is effectively bulletproof against the tested rounds.

This video tests the ballistic resistance of a 24-inch adjustable wrench against various calibers, from .22 LR to .50 BMG. The wrench demonstrated significant durability, withstanding multiple impacts from intermediate rifle cartridges and even showing resistance to .308 Winchester. The .50 BMG round, however, completely destroyed the wrench's internal gearing mechanism.

This video tests the ballistic resistance of a 100-pound block of lead against various firearm calibers, from .22LR up to .50 BMG. The experiment demonstrates how different rounds interact with soft lead, showing deformation and penetration depths. Notably, the .50 BMG round successfully penetrated the entire lead block and a target behind it, highlighting the extreme power of this caliber.

This guide details the field stripping and reassembly process for the Walther PPK/S, as demonstrated by a knowledgeable firearms instructor. It covers the unique trigger guard release mechanism for slide removal and emphasizes the importance of safety during the procedure. The review highlights the hybrid American/German manufacturing and its implications for import regulations.

This guide details troubleshooting steps for an AR-15 build experiencing cycling failures, as demonstrated by Graham Baates. It covers inspecting the bolt carrier group, buffer tube, adjustable gas block, and trigger assembly for potential issues. The process emphasizes careful disassembly and reassembly to diagnose and resolve short-stroking or failure-to-cycle problems.

This guide details the field stripping process for the Bersa TPR9C, as demonstrated by GBGuns. It covers the essential steps for safely disassembling the firearm for cleaning and inspection, emphasizing critical safety checks. The speaker's high authority level ensures a technically sound procedure.

This review details the Smith & Wesson Performance Center Pro Series Compact 1911 in 9mm, highlighting its external features, internal components, and field stripping process. The expert analysis covers the scandium alloy frame, 3-inch bull barrel, and trigger characteristics, offering insights into its suitability for concealed carry and potential limitations with certain ammunition types.