REVIC PMR428 Smart Rifle Scope | Power On

Published on October 29, 2019
Duration: 2:07

This guide details the simple process of powering the REVIC PMR 428 smart rifle scope on and off using the 'Enter' button. It also highlights important power management features like brightness settings and an adjustable sleep timer, crucial for maintaining battery life and ensuring the scope is ready when needed.

Quick Summary

To power on the REVIC PMR 428 smart rifle scope, press and hold the 'Enter' button for 3 seconds after installing a AAA lithium battery. The REVIC logo will appear, followed by the heads-up display. To power off, repeat the 3-second press and hold of the 'Enter' button. The scope also features an adjustable sleep timer for power management.

Chapters

  1. 00:05Powering Up the REVIC PMR 428
  2. 00:13Battery Installation
  3. 00:19Power On Procedure
  4. 00:28Confirmation of Power On
  5. 00:36Powering Off the Scope
  6. 00:45Power Management Features
  7. 00:53Troubleshooting Display Issues
  8. 01:15Understanding the Sleep Timer
  9. 01:28Sleep State Functionality
  10. 01:54Manual Power Control Summary

Frequently Asked Questions

How do I turn on the REVIC PMR 428 smart rifle scope?

To power on the REVIC PMR 428, ensure a AAA lithium battery is installed. Then, press and hold the 'Enter' button on the keypad for approximately 3 seconds. You will see the REVIC logo appear, indicating it is powering up and ready for use.

What is the procedure for turning off the REVIC PMR 428 scope?

To turn off the REVIC PMR 428, simply press and hold the 'Enter' button on the keypad for about 3 seconds. The display will confirm when the scope has powered down.

Why might my REVIC PMR 428 display be blank even if it's powered on?

If your REVIC PMR 428 display is blank, it's possible the brightness has been inadvertently turned all the way down. The scope may still be on and functioning, but the display is not visible. Check your brightness settings.

Does the REVIC PMR 428 have an automatic power-saving feature?

Yes, the REVIC PMR 428 has a settable sleep timer. After a period of inactivity, it enters a low-power sleep state to conserve battery. It remains accessible and can be quickly reactivated with a button press or dial turn.

More Tactical & Gear Videos You Might Like

More from Gunwerks

View all →