Breaking Down The Springfield Armory XD M Elite

Published on November 22, 2023
Duration: 4:42

Jack Sheppard, senior training manager with the USCCA, provides a detailed guide on disassembling, inspecting, cleaning, and reassembling the Springfield Armory XDM Elite. The instruction covers identifying critical wear points on the frame, slide, and barrel, emphasizing proper lubrication for smooth operation and longevity. A thorough function check is demonstrated to ensure the firearm is safe and operational after reassembly.

Quick Summary

Disassemble the Springfield Armory XDM Elite by ensuring it's unloaded, depressing the backstrap safety, pulling the slide to the rear and locking it, pushing up the slide lock/release, and removing the take-down pin. Inspect wear points on the frame, slide, and barrel, then lubricate critical areas before reassembling in reverse order.

Chapters

  1. 00:00Introduction to XDM Elite Breakdown
  2. 00:14Firearm Disassembly Steps
  3. 00:52Frame Inspection and Lubrication
  4. 01:09Slide and Barrel Disassembly
  5. 01:40Barrel and Slide Wear Point Analysis
  6. 01:55Reassembly Procedure
  7. 02:33Function Check and Final Steps

Frequently Asked Questions

How do you disassemble the Springfield Armory XDM Elite?

To disassemble the XDM Elite, ensure it's unloaded. Depress the backstrap safety, pull the slide to the rear and lock it, push up the slide lock/release, and remove the take-down pin. The slide will then move forward off the frame.

What are the key wear points to inspect on a Springfield XDM Elite?

Inspect the frame's front and back rails, sear, and ejector. On the slide, check the area that resets the trigger and sear. For the barrel, examine the feed ramp and locking lugs for any signs of abnormal wear, burrs, or damage.

Why is lubrication important for the Springfield XDM Elite?

Lubrication is crucial for smooth operation and preventing premature wear. Apply lubricant to the frame rails, slide contact points, and the sear/trigger reset surfaces to ensure the firearm cycles reliably and maintains its longevity.

How do you reassemble the Springfield Armory XDM Elite?

Reassembly is the reverse of disassembly. Insert the barrel, then the recoil spring assembly. Slide the slide onto the frame rails, lock it back, pivot the retaining pin, and then rack the slide to complete the process.

More Training & Techniques Videos You Might Like

More from USCCA

View all →