5 minute zero and we're ballin

Published on January 18, 2025
Duration: 2:27

This video demonstrates a rigorous test of thermal optic zero retention using a FalconClaw flip-to-side mount. A one-take, live-fire demonstration at 100 meters confirms that the mount reliably maintains zero even after repeated removal, pocket storage, and re-mounting. The test also includes power cycling the optic to ensure electronic zero consistency, concluding that the FalconClaw system offers dependable performance for thermal optics.

Quick Summary

Thermal optics can reliably maintain their zero with quality flip-to-side mounts like the FalconClaw. This video demonstrates a 100-meter live-fire test confirming zero retention after optic removal, pocket storage, and remounting, plus power cycling for electronic stability.

Chapters

  1. 00:00Intro: Thermal Optic Zero Retention Questions
  2. 00:16Live Fire Demo Setup: 100m, SIG MCX
  3. 00:36Stress Test: Mount, Remove, Pocket, Remount
  4. 01:16Group Analysis & Power Cycling Test
  5. 02:01Conclusion: FalconClaw Mount Zero Retention Confirmed

Frequently Asked Questions

Can thermal optics maintain their zero with flip-to-side mounts?

Yes, thermal optics can reliably maintain their zero with quality flip-to-side mounts. This video demonstrates that mounts like the FalconClaw, designed for repeatability, hold zero even after the optic is removed, pocketed, and remounted, confirmed by live fire tests.

How is thermal optic zero retention tested?

Zero retention is tested through live-fire drills. The optic is zeroed, then removed and remounted multiple times. Subsequent shots at the same distance verify if the point of impact has shifted. Power cycling the optic also confirms electronic zero stability.

What is the significance of power cycling a thermal optic?

Power cycling a thermal optic (turning it off and on) is a crucial step in confirming electronic zero retention. It ensures that the optic's internal systems reset correctly without altering the previously established point of aim/point of impact.

What distance was used for the zero retention test?

The zero retention test was conducted at a distance of 100 meters. This distance provides a significant enough challenge to reveal any minute shifts in the point of impact that might occur due to optic or mount manipulation.

More Tactical & Gear Videos You Might Like

More from FalconClaw

View all →